24WAC-DC Wall-mounted type Li-ON Battery Pack Charger

Features :

·Universal AC input / Full range

·No load power consumption<0.3W

·Pass energy star(CEC) levelregulation

·2 pole USA plug

·Classpower (without earth pin)

·Constant current and voltage(CC,CV mode)

·2 colors LED indicate for charging status

·Protections: Short circuit / Overload / Over voltage

·Fully enclosed plastic case

·Approvals: UL / CUL / CB / FCC / CE

·1 year warranty

Note:

1.All parameters are specified at 115VAC input, rated load, 25 70% RH ambient.

2.DC voltage: The output voltage set at point measure by plug terminal & 50% load.

3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.

4.Tolerance: includes set up tolerance, line regulation, load regulation.

5.Line regulation is measured from low line to high line at rated load.

6.Load regulation is measured from 20% to 100% rated load

7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.